Walk In Chamber

Overview

CME’s Modular Walk-In chamber offers unmatchable flexibility in installation. The panelised construction is engineered to perform at demanding testing conditions offering highest reliability and performance. Besides modular construction, we also offer Walk-In chamber made from welded rigid panels as wells the “Whole Room Conversions”

Walkinchamber

Modular Construction

In the modular construction the panels are prefabricated as per our standard size range. The panels are interlocked through tongue and groove assembly offering quick installation in a shorter period. The testing condition for such construction normally demands temperature range within -40oC to 80oC making it one of the most commonly used construction in the automotive industry.

On Site Welded Panels

For those testing which requires cascade refrigeration system or for temperature beyond -40oC to 80oC, CME offers a different construction in its Walk-In Chamber. The panels are fabricated on site by welding it together forming a rigid structure which not only have the lowest heat loss but also are structurally so strong that it can withstand extreme environmental testing conditions.

Room Conversion

Room Conversions offer the most flexible way to erect a Walk-In chamber in the shortest time. In this mode of construction an existing room is converted into a Walk-in chamber by insulating the walls. The only challenges lies in identifying an apt room which fits as per the required testing dimensions, else will result underutilization of available space.

Types of Flooring

Step-In Flooring

The Walk-In chamber is built on an existing floor with insulation of 150 mm – 200 mm. Step-In flooring is ideal for those testing applications where the test specimen is light in weight and offer easy mobility in placing it inside the test space.

Step Less Flooring

For the whole vehicle testing or to conduct test on a heavier specimen, the Step Less flooring is used as it will be easier to drive them from the ground to the test space. The floor is seamless made by inserting wall panels into it and is insulated from underneath.


 

Features

The modular walk-in chambers are built with mobile panels which are joined together in a special way offering tight seal and thus minimal loss from test space. Many standard as wells as advanced features are built into it to offer a most efficient testing experience.

Walk-In Chamber-markings


 

Models

  MWC-14K MWC-20K MWC-31K MWC-41K
Test Space Dimensions

(W X D X H ) (in mm)

2400 X 2400 X 2400 2400 X 3600 X 2400 3600 X 3600 X 2400 3600 X 4800 X 2400
Volume (L) 14000 20000 31000 41000
Temperature Range

-40°C to +80°C*

Humidity Range

10% RH to 95% RH

Refrigeration System

Single Stage System

Standard Ramp Rate

3°C/min


 

Downloads

Please fill the below form to receive a download link to the brochure.

 

Users of Custom Built Chambers

We serve customers from diverse industries across the globe. We have earned their trust over the years and today they have become our biggest advocate of our brand. Few of such customers of Climatic Chamber are mentioned below.

361435-tata-motors wipro tvs sgs
       
man hummel totota l & T itc limited
       
saint gobin philips lafarge
       
honda HP bosch trw
       
flex hineywell landis gyr
       
parker takata moog continental

CME’s Modular Walk-In chamber offers unmatchable flexibility in installation. The panelised construction is engineered to perform at demanding testing conditions offering highest reliability and performance. Besides modular construction, we also offer Walk-In chamber made from welded rigid panels as wells the “Whole Room Conversions”

Walkinchamber

 

Modular Construction

In the modular construction the panels are prefabricated as per our standard size range. The panels are interlocked through tongue and groove assembly offering quick installation in a shorter period. The testing condition for such construction normally demands temperature range within -40oC to 80oC making it one of the most commonly used construction in the automotive industry.

On Site Welded Panels

For those testing which requires cascade refrigeration system or for temperature beyond -40oC to 80oC, CME offers a different construction in its Walk-In Chamber. The panels are fabricated on site by welding it together forming a rigid structure which not only have the lowest heat loss but also are structurally so strong that it can withstand extreme environmental testing conditions.

 

Room Conversion

Room Conversions offer the most flexible way to erect a Walk-In chamber in the shortest time. In this mode of construction an existing room is converted into a Walk-in chamber by insulating the walls. The only challenges lies in identifying an apt room which fits as per the required testing dimensions, else will result underutilization of available space.

 

Types of Flooring

Step-In Flooring

The Walk-In chamber is built on an existing floor with insulation of 150 mm – 200 mm. Step-In flooring is ideal for those testing applications where the test specimen is light in weight and offer easy mobility in placing it inside the test space.

Step Less Flooring

For the whole vehicle testing or to conduct test on a heavier specimen, the Step Less flooring is used as it will be easier to drive them from the ground to the test space. The floor is seamless made by inserting wall panels into it and is insulated from underneath.

The modular walk-in chambers are built with mobile panels which are joined together in a special way offering tight seal and thus minimal loss from test space. Many standard as wells as advanced features are built into it to offer a most efficient testing experience.

Walk-In Chamber-markings

  MWC-14K MWC-20K MWC-31K MWC-41K
Test Space Dimensions

(W X D X H ) (in mm)

2400 X 2400 X 2400 2400 X 3600 X 2400 3600 X 3600 X 2400 3600 X 4800 X 2400
Volume (L) 14000 20000 31000 41000
Temperature Range

-40°C to +80°C*

Humidity Range

10% RH to 95% RH

Refrigeration System

Single Stage System

Standard Ramp Rate

3°C/min

Please fill the below form to receive a download link to the brochure.
We serve customers from diverse industries across the globe. We have earned their trust over the years and today they have become our biggest advocate of our brand. Few of such customers of Climatic Chamber are mentioned below.

361435-tata-motors wipro tvs sgs
       
man hummel totota l & T itc limited
       
saint gobin philips lafarge
       
honda HP bosch trw
       
flex hineywell landis gyr
       
parker takata moog continental

Walk In Chamber

Venue: CTC Complex, Chennai, India | Date: January 10-12, 2018 | Our Booth No.: 2042
Products on Display: All environmental chambers for automotive testing