preloader

Altitude Chamber

Aircraft and its components are subject to extreme pressure and climatic conditions during flights. These parameters have a significant influence on the functioning of individual components, and they must be monitored and measured for safety reasons. CME Altitude chamber allow for the testing of aerospace components in an environment with controlled pressure, temperature and humidity parameters. An altitude of 100,000 feet [10 mbar] can be simulated in the test space.

Got Technical Question!

Aircraft and its components are subject to extreme pressure and climatic conditions during flights. These parameters have a significant influence on the functioning of individual components, and they must be monitored and measured for safety reasons. CME Altitude chamber allow for the testing of aerospace components in an environment with controlled pressure, temperature and humidity parameters. An altitude of 100,000 feet [10 mbar] can be simulated in the test space.

As rightly quoted “Good engineering is a perquisite for reliability”, a lot of detailing has gone in both the system designing and the component selection of the CME-AT series. These technologies require the utmost reliability of the components and systems on board, since human lives are often entrusted to them. Be it in refrigeration system comprising the semi hermetically sealed reciprocating compressor, high efficiency evaporator unit, in-built water-cooled condenser, on-Demand cooling, et all. are all carefully designed to offer the best reliability to the customer. The chamber can offer altitude ranges of up to 150,000 feet[1mbar] optionally as well. The Altitude chamber can also be customized as per the test requirements. 

 

Model Selection table        
    CATH CHAMBER
Models   AT-225-B AT-560-B AT-1000-B AT-1500-B
Test Space Dimension
(WXDXH)
mm 500 x 400 x 600 780 x 800 x 940 1000 x 1000 x 1000 1000 x 1500 x 1000
inch 20 X 16 X 24 31 x 31 x 37 39 x 39 x 39 39 x 59 x 39
Test Space Volume  Ltr / Cuft  225 / 8  560 / 20  1000 / 35.3  1500 / 53
Temperature Range*  (°C)
(°F)
 - 60 to +120
 -76 to +248
Ramp rate**  (°C/min) 1/2/3/5
Altitude range mbar
Ft
Upto 10 [Default], 1 [Optional]
Upto 100000 [Default], 150000 [Optional]
* Optional Temperature Range also available      
**Customized ramp rates are also available      
CATH - Combined Altitude, Temperature and humidity chamber    

Related Products

CME is a leading engineering company specialised in environmental simulation testing technology.
cimatic chamber

Modular Walkin Chamber

CME’s Walk in chambers are designed for simulating, monitoring & control of environmental conditions like temperature & humidity...

cimatic chamber

Thermal Shock Chamber

The thermal shock chamber has two zones namely the hot zone and the cold zone. ..

cimatic chamber

Nano BenchTop

The Benchtop Chamber is ideal for conducting reliability testing on the specimen, which is smaller and light in weight. ..

cimatic chamber

Climatic Chamber

The PAC series of climatic chambers are a great choice for cyclic low, high temperature and humidity tests...

cimatic chamber

Basic Salt Spray Tester

CME Salt Spray Test chamber meet the requirements of basic, continuous salt spray tests conducted at a single temperature only,..

cimatic chamber

Cyclic Corrosion Tester

CME SF-CCT chambers are designed to be flexible enough to comply with as many different CCT specifications as possible...